Samco Rubber & Batteries
Tis Hazari, Delhi
SEND SMS
SEND EMAIL

SMPS Battery Charger

Leading Manufacturer of 12v/ 2amp smps battery charger, digital 12v/ 10amp smps battery charger, 12v/ 3amp smps battery charger and 24v/ 10amp smps battery charger from Delhi.

12V/ 2amp SMPS Battery Charger

12V/ 2amp SMPS Battery Charger
  • 12V/ 2amp SMPS Battery Charger
Get Best Quote
Approx. Price: Rs 460 / UnitGet Latest Price

Product Details:

Automation GradeAutomatic
TypeBattery
Charging TechniqueSMPS
Indication DisplayLED
Charger TypeLED
FuseYes
Over Voltage ProtectionYes
Automatic Optimal ChargeYes
Wall MountingNo
Cooling FanYes
Packing TypeSinghe
Battery TypeVRLA Type, AGM/Gel Cell Type, Flooded Type, Sealed Maintenance Free ( SMF) Type
Warranty6 Months
Model No.12V/2amp Battery Charger SMPS
Battery Voltage12
BrandSiyachi
Over Current ProtectionYes
Battery Capacityupto 14ah
Usage/ApplicationSMPS Battery Charger
Switching Mode ControlYes
Protection LevelYes
Current2 A
Under Voltage ProtectionYes
UsageBattery Charger
FeaturesCharge all types of motorcycle batteries and small size UPS batteries.
Dimension MmLength 90mm Width 140mm Height 55mm
Length90 mm
Width140 mm
Height55 mm
Weight500 gm
Voltage12 V

Small size, automatic SMPS battery charger. 12volt 2amp. This charger is useful for charging all types of motorcycle batteries and for small size UPS batteries.

This is a Constant Current Constant Voltage charger. Charge batteries like 2.5ah, 3ah, 4ah, 5ah, 7ah, 9ah, 12ah and 14ah.

HOW TO USE:

Connect battery to charger and switch it on.

When battery is charged green light lights up on the charger.

Charge for 1 hour more and the battery is ready.

More About SMPS Chargers

  • Benefits of Switch-mode Chargers:
  • Smaller size and lightweight: No tapering of current – Constant Current. In the transformer type chargers, the current reduces as the battery voltage goes up. For example in a 10 Amps charger, the current will start at 10 Amps and will go down as the battery voltage increase. At the end (full charge) the current is almost zero. So the charger is giving an average of 5 Amps. The switch-mode charger gives a constant current. In charging time, the constant current is equal to almost twice the tapered current. So a 5 Amps Constant Current battery charger is as fast as a tapered 10 Amps transformer type charger. Some conventional chargers are constant current types but they are more expensive, larger in size and weight.
  • More Reliable: In switch-mode, the transformers are installed on the electronics circuit board. Since all components are on circuit board, the switch-mode chargers are much more reliable.
  • Ability to function with wide AC voltage fluctuations: The switch-mode chargers are capable of large AC voltage fluctuations without any loss of output power.
  • Deep discharge start: Can charge a battery as low as 6 volts. Most of transformer type chargers need about 12 volts to start.
  • Current Limit: The switch-mode charger will not give large current at low voltage (unlike conventional chargers). This protects the battery. Portability: Even if a charger is not installed on-board, it is portable due to small size and lightweight. The user can easily carry it with him to charge the battery.

 

Key Features:
  • Small size & light weight: Portability is a major feature. The charger can be installed on-board.
  • Short circuit protection: If you touch the output +ve & -ve wires (with AC ON) and there will be no failure. But it is best to be avoided as it puts stress on electronics.
  • Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally. But it is best to be avoided as it puts stress on electronics.
  • No current drain: If the AC is OFF and the charger is connected to the battery, the drain of current from the battery is very minimal.
  • De-sulfation of battery: The charger will remove loose sulfation and increase the battery life.
  • Low voltage start: SIYACHI charger will start charging from 6 volts. This means a deep discharged battery can be charged. Transformer type chargers cannot do this.
Request
Callback
Yes! I am interested

Digital 12v/ 10amp SMPS Battery Charger

Digital 12v/ 10amp SMPS Battery Charger
  • Digital 12v/ 10amp SMPS Battery Charger
Get Best Quote
Approx. Price: Rs 2,190 / UnitGet Latest Price

Product Details:

BrandSiyachi
Weight1.8 kg
Warranty6 Months
Length160 mm
Width235 mm
Height140 mm

Charge 1 battery or 10 batteries at a time in PARALLEL . Automatic SMPS battery charger. 12volt 10amp. This charger is useful for charging all types of batteries like Motorcycle, UPS, Tubular, Inverter or Generator batteries.

This is a Constant Current Constant Voltage charger.

There is a HIGH/LOW switch at the back. If the switch is set to HIGH (H) battery voltage goes upto 15-15.5volt. If the switch is set to LOW (L) battery voltage goes upto 14-14.5volt.

HOW TO USE:

Connect battery to charger and switch it on.

When battery is charged ampere slowly drops.

Charge for 1 hour more and the battery is ready.


More About SMPS Chargers:

  • SIYACHI SMPS Battery Chargers uses new technology in a small box. With R & D facility in Delhi these chargers are designed for charging Batteries. SIYACHI Battery Chargers are of SWITCH-MODE TECHNOLOGY. SIYACHI has battery chargers with output of 12, 24 and 48 volts. SIYACHI battery chargers have a longevity rating of over 6000 power-on-hours. Components commonly found in computers are utilized in these constant current chargers to reduce size and weight. One such component is a sophisticated switching circuit that “chops up” AC input at a rate of thousands of pulses per second. Since less power is being manipulated at a faster rate, the conversion to 12, 24 & 48 VDC can be completed without the need for a large transformer.
  • The Switch-mode Charger is an electronic device whereas the transformer type charger is an electrical device with some electronics.

 

Benefits of Switch-mode Chargers:

  • Smaller size and lightweight: No tapering of current – Constant Current. In the transformer type chargers, the current reduces as the battery voltage goes up. For example in a 10 Amps charger, the current will start at 10 Amps and will go down as the battery voltage increase. At the end (full charge) the current is almost zero. So the charger is giving an average of 5 Amps. The switch-mode charger gives a constant current. In charging time, the constant current is equal to almost twice the tapered current. So a 5 Amps Constant Current battery charger is as fast as a tapered 10 Amps transformer type charger. Some conventional chargers are constant current types but they are more expensive, larger in size and weight.
  • More Reliable: In switch-mode, the transformers are installed on the electronics circuit board. Since all components are on circuit board, the switch-mode chargers are much more reliable.
  • Ability to function with wide AC voltage fluctuations: The switch-mode chargers are capable of large AC voltage fluctuations without any loss of output power.
  • Deep discharge start: Can charge a battery as low as 6 volts. Most of transformer type chargers need about 12 volts to start.
  • Current Limit: The switch-mode charger will not give large current at low voltage (unlike conventional chargers). This protects the battery.
  • Portability: Even if a charger is not installed on-board, it is portable due to small size and lightweight. The user can easily carry it with him to charge the battery.

 

Request
Callback
Yes! I am interested

12V/ 3amp SMPS Battery Charger

12V/ 3amp SMPS Battery Charger
  • 12V/ 3amp SMPS Battery Charger
Get Best Quote
Approx. Price: Rs 705 / PieceGet Latest Price

Product Details:

BrandSiyachi
Usage/ApplicationThis charger is useful for charging motorcycle batteries, UPS batteries upto 45ah.
Warranty6 Months
TypeBattery
Battery TypeFlooded Type, Sealed Maintenance Free ( SMF) Type, VRLA Type
Automation GradeAutomatic
Length145 mm
Width130 mm
Height75 mm
Weight750 gm
Charge BatteryUp to 45 Ah

Small size, automatic SMPS battery charger. 12volt 3amp. This charger is useful for charging motorcycle batteries, UPS batteries upto 45ah and for car batteries.

This is a Constant Current Constant Voltage charger. Charge batteries upto 45ah.

HOW TO USE:

Connect battery to charger and switch it on.

When battery is charged green light lights up on the charger.

Charge for 1 hour more and the battery is ready.

More About Smps Chargers:

  • SIYACHI SMPS Battery Chargers uses new technology in a small box. With R & D facility in Delhi these chargers are designed for charging Batteries. SIYACHI Battery Chargers are of SWITCH-MODE TECHNOLOGY. SIYACHI has battery chargers with output of 12, 24 and 48 volts. SIYACHI battery chargers have a longevity rating of over 6000 power-on-hours. Components commonly found in computers are utilized in these constant current chargers to reduce size and weight. One such component is a sophisticated switching circuit that “chops up” AC input at a rate of thousands of pulses per second. Since less power is being manipulated at a faster rate, the conversion to 12, 24 & 48 VDC can be completed without the need for a large transformer. The Switch-mode Charger is an electronic device whereas the transformer type charger is an electrical device with some electronics.

 

Benefits of Switch-mode Chargers:

  • Smaller size and lightweight: No tapering of current – Constant Current. In the transformer type chargers, the current reduces as the battery voltage goes up. For example in a 10 Amps charger, the current will start at 10 Amps and will go down as the battery voltage increase. At the end (full charge) the current is almost zero. So the charger is giving an average of 5 Amps. The switch-mode charger gives a constant current. In charging time, the constant current is equal to almost twice the tapered current. So a 5 Amps Constant Current battery charger is as fast as a tapered 10 Amps transformer type charger. Some conventional chargers are constant current types but they are more expensive, larger in size and weight.
  • More Reliable: In switch-mode, the transformers are installed on the electronics circuit board. Since all components are on circuit board, the switch-mode chargers are much more reliable.
  • Ability to function with wide AC voltage fluctuations: The switch-mode chargers are capable of large AC voltage fluctuations without any loss of output power.
  • Deep discharge start: Can charge a battery as low as 6 volts. Most of transformer type chargers need about 12 volts to start.
  • Current Limit: The switch-mode charger will not give large current at low voltage (unlike conventional chargers). This protects the battery.
  • Portability: Even if a charger is not installed on-board, it is portable due to small size and lightweight. The user can easily carry it with him to charge the battery.
Request
Callback
Yes! I am interested

24V/ 10amp SMPS Battery Charger

24V/ 10amp SMPS Battery Charger
  • 24V/ 10amp SMPS Battery Charger
Get Best Quote
Approx. Price: Rs 2,550 / PieceGet Latest Price

Product Details:

Over Current ProtectionYes
Warranty6 Months
Weight2.2kgs
Input ProtectionYes
PhaseSingle
Under Voltage ProtectionYes
Model No.24 volt 10 amp Battery Charger SMPS
Cooling FanYes
Output Voltage24 V
DimensionLength 160mm Width 235mm Height 140mm
Charging TechniqueSMPS
MaterialMetal
Indication DisplayYes
Current10 A
Battery TypeVRLA Type, Sealed Maintenance Free ( SMF) Type, AGM/Gel Cell Type, Flooded Type
Over Voltage ProtectionYes
CoolingFan cooling
ColorGreen
FeaturesThis is a Constant Current Constant Voltage charger.
Automation GradeAutomatic
Automatic Optimal ChargeYes
BrandSiyachi
Thermal ManagementYes
Battery Gravity BuilderYes
Charging Ampere10
Usage/ApplicationCharge 2 batteries at a time. Charge all types of Tubular, Inverter and Generator batteries.
Switching Mode ControlYes

Charge 2 batteries at a time. Automatic SMPSbattery charger. 24volt 10amp. This charger is useful for charging all types of Tubular, Inverter and Generator batteries.

This is a Constant Current Constant Voltage charger.

There is a HIGH/LOW switch at the back. If the switch is set to HIGH (H) battery voltage goes upto 15-15.5volt. If the switch is set to LOW (L) battery voltage goes upto 14-14.5volt.

HOW TO USE:

Connect battery to charger and switch it on.

When battery is charged ampere slowly drops.

Charge for 1 hour more and the battery is ready.



Benefits of Switch-mode Chargers:

  • Smaller size and lightweight: No tapering of current – Constant Current. In the transformer type chargers, the current reduces as the battery voltage goes up. For example in a 10 Amps charger, the current will start at 10 Amps and will go down as the battery voltage increase. At the end (full charge) the current is almost zero. So the charger is giving an average of 5 Amps. The switch-mode charger gives a constant current. In charging time, the constant current is equal to almost twice the tapered current. So a 5 Amps Constant Current battery charger is as fast as a tapered 10 Amps transformer type charger. Some conventional chargers are constant current types but they are more expensive, larger in size and weight.
  • More Reliable: In switch-mode, the transformers are installed on the electronics circuit board. Since all components are on circuit board, the switch-mode chargers are much more reliable.
  • Ability to function with wide AC voltage fluctuations: The switch-mode chargers are capable of large AC voltage fluctuations without any loss of output power.
  • Deep discharge start: Can charge a battery as low as 6 volts. Most of transformer type chargers need about 12 volts to start.
  • Current Limit: The switch-mode charger will not give large current at low voltage (unlike conventional chargers). This protects the battery. Portability: Even if a charger is not installed on-board, it is portable due to small size and lightweight. The user can easily carry it with him to charge the battery.

Key Features:

  • Small size & light weight: Portability is a major feature. The charger can be installed on-board.
  • Short circuit protection: If you touch the output +ve & -ve wires (with AC ON) and there will be no failure. But it is best to be avoided as it puts stress on electronics.
  • Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally. But it is best to be avoided as it puts stress on electronics.
  • No current drain: If the AC is OFF and the charger is connected to the battery, the drain of current from the battery is very minimal.
  • De-sulfation of battery: The charger will remove loose sulfation and increase the battery life.
  • Low voltage start: SIYACHI charger will start charging from 6 volts. This means a deep discharged battery can be charged. Transformer type chargers cannot do this.
  • Maintain full charge & no overcharging: SIYACHI charger can be left connected to the battery indefinitely without harming (overcharging) the battery.
  • SIYACHI SMPS Battery Charger can charge any type of lead acid battery fully – Gel, AGM or wet battery.

 

Request
Callback


Additional Information:

  • Delivery Time: 1 day
Yes! I am interested
X

Explore more products



Reach Us
Arender Siali (CEO)
21, Gokhale Market, Opposite Tis Hazari Court
Delhi -110054,India



Call Us

Share Us

F GT L


Send E-mailSend SMS